The 1μm repeatability barrier

We had cleared the external size and durability issues, but the product repeatability was 10μm.
A far cry from the desired 1μm accuracy… 

Immediately, mechanical engineers worked to carve out new products with shapes changed on the micron scale.

They had to trust their product sense.

They had the skills of experienced mechanical engineers who could think of assembly processes and create small component technology to fit into the final dimensions even without pre-formed plans.

Each time a component was cut through trial-and-error the repeatability was increasing,
but the super-compact size, smaller than a dime, meant that even minor machining variation would determine the repeat accuracy.

A new and improved contact pin shape was created to satisfy the required accuracy consistency.

Finally, with this 1μm repeatability was achieved.

All that was required was a little hand soldering
But… that raised the next issue — mass production

As completion approached and mass production was to be considered, 
issues with production technology came to the fore.

Precision assembly of PT Touch Switches would require advanced production technology.

In particular, the solder that connects the super-fine cord and contacts would require the absolute most advanced technology. 
But only the most experienced workers could achieve such soldering.

In response, we decided to introduce a soldering robot such that even unqualified people could easily solder the joint.
A special set jig was developed that fixed the super-fine cord in place to automate precision soldering.
Anyone could now perform the precision soldering at the press of a button.

Too small in size for melt injection

The adhesive injected into the product takes 24 hours to cure, causing major productivity issues.
The adhesive is absolutely necessary to protect the internal structure.

Instead of the regular adhesive, we thought of using hot-melt, which hardens at room temperature.

We immediately requested a dedicated machine from a filler manufacturer, but the M5 ultra fine size was a problem.
“The injection site is too small for uniform injection” was the reply we received.

However, once again the engineering spirit kicked into gear
“If they can’t do it, we will just have to create our own machine.”
The engineers began designing a filler mold themselves.

Relying on intuition and adjusting at the micron level, soft pressure is applied to the fine M5 internals, creating a hot-melt filler mold.

This allowed uniform hot-melt injection to be achieved.
The curing task that previously took 24 hours had been dramatically shortened.

Technology condensed into a small body

In this way, the Ultra Small Size Positioning Switches [PT] was born through advanced machining technology and precision assembly technology.

We realized,
・M5×17mm size
・3 million contact life time
・1/1000mm repeatability

The world's smallest size enables an installation in a space-limited environments.
As the switch are only made of precision mechanical components,
temperature drifts due to external environments or self-generation never occur.

Guaranteed high reliability.

Loved by engineers worldwide and adopted into various machinery including the latest semiconductor production devices, neurosurgical microscopes, CNC compact lathes and more.

An accurate positioning switch with a size smaller than a dime.
This is the spirit of engineers and the art of technology, inventing not just products but entire production equipment.