METROL specialize in manufacturing Tool Setters & Precision Positioning Switches

Ultra precision position Swhitches  Metrol

Prevents defective automible parts by replacing “Air sensor”.

shutterstock_130223399_3

Automobile industry

The client is a precision parts manufacturer that produce heat sinks for major automakers.
A representative of the manufacturing line consulted us on "seating confiemation " of the workpiece conveyed by the robot arm.

Client's Issues

"Air sensors" have been used for confirming the seating of the heat sink which is conveyed to the pallet changer by the robot arm when machining on the CNC machining center.

Although the client set the detection distance to 100µm, because of the low accuracy of "air sensors", workppiece seating failure could not be prevented, resulting in defective products.

He found our product by sales visit when looking for a sensor that can detect the seating with ±1µm repeatability.

heatshink_before

The main focus of the issues

  • A 100µm uplift of the workpiece shold be detected reliably.

Metrol's suggestions

However, conventional "air sensor" is intended for "existence detection" of workpieces and, because of the large signal variation, it is not suited for stable "seating confirmation".
Metrol's "Air Gap Sensor [Long range detection type]" is capable of reliably detecting a 100µm uplift with ±1µm repeatability.

Defective products can be prevented by precision "seating confirmation".

heatsink_after_2

Improvements

  • A 100µm uplift of the workpiece can be detected with ±1µm repeatability.

Comment from Metrol representative

Like the cases introduced here, "Air Gap Sensors" have been widely adopted by automobile precision parts manufacturing lines that require a high-accuracy "machining of the ABS actuator parts" or "machining of the shaft for engines".
If you have any troubles with "seating confirmation" of automobile components, please feel free to contact us.

cMarketing department staff

For further information about the products used in this application

DPA-LR1_jirei

Air Gap Sensor [Long range detection type]

Reconsider everything you thought you knew about "Gap Sensors".
Stably detect gaps of 80 to 350µm between a rough surface workpiece or large workpiece and jigs.

 

Contact Form

PAGETOP